GreenGlass is a premium gypsum board material that will perform as expected when stored and installed in accordance with ASTM C840 and GA 216.
Limitations
In addition, carefully following the limitations below will maximize the product’s safety, durability and performance results.
- For interior use only
- Should not be immersed in water or subjected to cascading water conditions
- Should not be used as a tile backer in tub and shower surrounds or in areas with a risk of continuous exposure to water such as swimming pool enclosures, steam rooms or gang shower rooms
- Avoid exposure to prolonged, extreme temperatures: 125°F (52°C)
- Should be stored, handled and installed to comply with industry standards GA 216 & ASTM C840
Failure to adhere to these limitations and manufacturers instructions will void the warranty.
Cautions
Glass fibers are contained within GreenGlass gypsum board and in the glass facers. Handling may cause skin irritation. Cutting and handling may release glass fibers. Do not use a power saw. Avoid inhalation of these fibers as they may cause respiratory irritation or even aggravated medical conditions.
- Skin: If skin contact causes irritation, wash the area with soap and water.
- Eyes: If contact with eyes, flush the eye with clean water for 15 minutes.
- Lungs: Avoid any inhalation of fibers. If unintended inhalation occurs, move to an area of fresh air.
Handling and Hygiene
Care should be used in handling GreenGlass gypsum board to ensure worker comfort and safety. Below are some handling guidelines and safety requirements:
- Avoid breathing dust-glass fibers by using a NIOSH-approved dust mask when cutting or sanding.
- Gloves and loose fitting long-sleeved clothing should be worn to avoid contact of the GreenGlass with bare skin.
- Eye protection with side protection should be worn. Use either safety glasses with side shields or goggles.
- Skin should be washed after contact with GreenGlass. Wash exposed skin with soap and water.
- Clothing may entangle glass fibers. Clothing which has glass fibers entangled should be washed separately from other clothing.
See MSDS for more information.

