Six inches wider than a standard 48" gypsum board panel, Stretch54 reduces the number of joints in nine-foot walls for a smoother surface, critical for today's thinner wallpapers and new no-texture finishes. That’s because two standard-width boards come up one foot short when hanging panels on nine-foot walls. A one-foot filler strip must be used to complete the wall, which also adds an additional joint to tape and float.
Stretch54 has been fire-resistance classified by Underwriters Laboratories, and has been approved for use in multiple fire-resistant assemblies. Below is a list of those systems.
D301, D501, D502, G222, G259, G501, G502, G503, G504, G505, G507, G508, G509, G510, G512, G514, G515, G520, G521, G523, G524, G525, G526, G527, G528, G529, G530, G531, G533, G534, G538, G567, J501, J503, J504, L501, L502, L503, L504, L505, L506, L507, L508, L509, L510, L511, L512, L513, L514, L515, L516, L517, L518, L519, L520, L522, L523, L524, L525, L526, L527, L528, L529, L530, L532, L538, L539, L540, L541, L542, L574, L580, L588, L591, L597, M504
P237, P502, P503, P504, P505, P506, P507, P508, P509, P510, P512, P513, P514, P518, P519, P545, P550, P551
U015, U023, U026, U301, U302, U304, U305, U309, U311, U312, U313, U317, U320, U321, U329, U333, U334, U337, U340, U342, U344, U354, U355, U368, U369, U370, U374, U379, U403, U405, U406, U410, U411, U412, U421, U425, U426, U428, U429, U435, U436, U438, U440, U441, U442, U443, U444, U445, U448, U451, U452, U453, U454, U455, U457, U465, U466, U467, U469, U473, U474, U478, U485, U497, U501, U502, U504, U505, U506, U510, U512, U513, U524, U528, U529, U602, U605, U608, U609, U615, U617, U620, U622, U623, U626, U627, U637, U642, U643, U645, U910, U912, U914, V414, V417, V418, V419, V431, V433, V450, V489, V493, V495
X404, X501, X502, X504, X507, X508, X509, X510, X513, X514, X515, X516, X517, X518, X520, X521, X522, X523, X524, X525, X526, X528, X530, X531, X533, X534
We are developing a library of system assemblies incorporating Temple-Inland gypsum board for use in the BIM-based design program Revit. Currently this library includes the following assemblies: U301, U305, U354, U375, U411, U425, U428, U429, V433, U465, G505, G514, L502, L574. (Some with multiple variations.)
If you do not see the design number you need in this list, please contact glennmiller@templeinland.com or ericmarsal@templeinland.com
Note: These drawings are presented for the convenience of the user. Responsibility for the correct use of these assemblies lies with the user. Greater detail is available in Temple-Inland's U.L. Catalog. Or contact your Temple-Inland representative for assistance.
Please refer to local code requirements and the U.L. Fire-Resistance Directory for specific construction details when a fire-rated assembly is required.