Dimensions

Thickness (in.)	3/8 - 1-1/8
Panel Sizes (in.) countertops and shelving available	Standard 4-foot sizes

Physical Properties

Averages1	3/8"- < 5/8"	5/8" - 3/4"	> 3/4"
MOR-Modulus of Rupture (psi)	1600	1400	1400
MOE-Modulus of Elasticity (kpsi)	290	270	270
IB-Internal Bond (psi)	80	70	55
Face Screw Holding Capacity (lbs)	225	225	225
Edge Screw Holding Capacity (lbs)	NA	160	160
Formaldehyde Emission (ppm)2	0.09	0.09	0.09
Flame Spread3	See Note 3	See Note 3	See Note 3
Smoke Developed3	See Note 3	See Note 3	See Note 3
1. One-panel minimum average (ASTM D1037 / ANSI A208.1-2009)   2. Non-averaged maximum test value   3. Underwriters Laboratories, Inc. Classified Wood Particleboard: Surface Burning Characteristics. UL 723-Class 1 or ASTM E-84 Class A.

Tolerances

Length & Width Tolerance	± 1/16"
Squareness Tolerance	≤ 1/8"
Straightness Tolerance	± 1/64" / 2ft.
Thickness Tolerance (Within Panel Average)	± 0.004"
Thickness Tolerance (Panel to Panel Average)	± 0.004"

Environmental Credits

LEED	Credits	Description
Recycled Content	MR credit 4	Awards 1 or 2 points for using products with recycled content that constitute at least 10% or 20%, based on cost, of the total value of project materials.
Locally Produced Materials	MR credit 5	Awards 1 or 2 points for using materials on a project that are extracted and manufactured within 500 miles that constitute at least 10% or 20%, based on cost, of the total value of project materials.

NAHB	Credits	Description
Pre-Consumer Recycled Content	604.1(2)	Use recycled content products in major areas such as walls, floors, insulation and roofing.
FSC® Certification	606.2(3)	Wood or wood-based products available that are certified by Forest Stewardship Council™.
Other Certification	606.2(6)	Wood-based components certified in accordance to CPA ECC 4-11.
Low Formaldehyde/VOC Emissions	901.4(a)	In compliance with ANSI A208.1.
Low Formaldehyde/VOC Emissions	901.4(c)	In compliance with CPA ECC 4-11.

CARB	Credits	Description
California Air Resource Board	C.A.R.B.	Approved NAF exemption, exceeding requirements of CARB, Phase 2.

ECC Certification

TemStock particleboard products produced in Temple-Inland’s Monroeville, Alabama, Hope, Arkansas, Thomson, Georgia, and Diboll, Texas, facilities have been awarded the Composite Panel Association (CPA) Eco-Certified Composite (ECC) grademark, signifying compliance with the highest industry measure of environmental responsibility.

Read more about ECC certification criteria which includes standards for formaldehyde emissions, carbon storage, localized use of renewable resources, recycled and/or recovered fiber, sustainability and responsible wood sourcing.

FSC Certification

Particleboard produced at Temple-Inland's Monroeville, Alabama, Hope, Arkansas, Thomson, Georgia, and Diboll, Texas, facilities that is certified to conform to the requirements of Forest Stewardship Council™ standards for Chain of Custody, Controlled Wood and Reclaimed Material manufacturing is available by special order.

Formaldehyde Emissions

Large chamber air sample testing of Temple-Inland TemStock products has been conducted per ASTM E1333-96 (2002) to verify their conformance to California Air Resources Board (CARB) Phase 2 formaldehyde emission standards as well as the requirements of ANSI A208.1 Table B and HUD DFR Part 3280.

 

Warning

This particleboard contains low fuming urea formaldehyde resin and may release formaldehyde vapors in low concentrations. Formaldehyde vapors can be potentially irritating to the eyes and upper respiratory system. Should irritation develop, consult your physician.